Yamaha RX Z9 MCXSP10 Manual - Page 10
Opening and closing the front panel, REC OUT/ZONE 2
UPC - 027108918204
View all Yamaha RX Z9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
CONTROLS AND FUNCTIONS 0 MULTI JOG Rotate to select or adjust items when used with the DSP PROGRAM, PRESET/TUNING, BALANCE or TONE CONTROL buttons. A BALANCE Adjusts the left/right balance of the front, presence, surround and surround back speakers. B TONE CONTROL Press this button before rotating MULTI JOG to adjust the bass/treble balance for the front left/right, center and subwoofer channels (see page 40). C VOLUME Controls the output level of all audio channels. This does not affect the REC OUT level. D SPEAKERS A/B Turns on or off the set of front speakers connected to the A and/or B terminals on the rear panel each time the corresponding button is pressed. E PHONES jack Outputs audio signals for private listening with headphones. When you connect headphones, no signals are output to the OUTPUT jacks or to the speakers. F OPTIMIZER MIC jack Use to connect and input audio signals from the supplied microphone for the AUTO SETUP function (see page 33). G REC OUT/ZONE 2 Selects the source you want to direct to the audio/video recorder and ZONE 2 outputs independently of the source you are listening to or watching in the main room. When set to the SOURCE/REMOTE position, the input source is directed to all outputs. The source in Zone 2 and the source you record are always identical. H VIDEO AUX jacks Inputs audio and video signals from a portable external source such as a game console. To reproduce source signals from these jacks, select V-AUX as the input source. I TUNING MODE Switches the tuning mode between automatic ("AUTO" indicator on) and manual ("AUTO" indicator off). J MEMORY Stores a station in the memory. Hold down this button for more than 3 seconds to start automatic preset tuning. K FM/AM Switches the reception band between FM and AM. L PRESET/TUNING Selects preset station number 1 to 8 when the colon (:) is displayed next to the band indication in the front panel display. Selects the tuning frequency when the colon (:) is not displayed. ■ Opening and closing the front panel door When you want to use the controls behind the front panel door, open the door by gently pressing on the lower part of the panel. Keep the door closed when not using these controls. To open, press gently on the lower part of the panel. 6