Yamaha YSP-2500 Owners Manual - Page 25

Connecting a TV Connect a TV to the unit so that video input to the unit can be output to the TV. You can also enjoy playback of TV audio on the unit. • Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality. • For playback of 3D and 4K video content, use a high-speed HDMI cable. TVs that support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied). TVs that do not support Audio Return Channel (ARC) Connect the TV to the unit with an HDMI cable (not supplied) and an optical cable. Center unit (rear) HDMI OUT (ARC) jack SYSTEMSUBWOOFER CONNECTOR OUT R L AUX1 AUX2 TV OPTICAL OUT (ARC) HDMI OUT (ARC) IN1 IN2 IN3 HDMI HDMI input HDMI (ARC) HDMI Center unit (rear) HDMI OUT (ARC) jack SYSTEMSUBWOOFER CONNECTOR OUT R L AUX1 AUX2 TV OPTICAL OUT (ARC) HDMI OUT (ARC) IN1 IN2 IN3 HDMI HDMI input HDMI HDMI TV When connecting a TV that supports Audio Return Channel (ARC), activate the HDMI control function (p. 59). Audio Return Channel (ARC) ARC enables input and output of audio signals via a single HDMI cable. If the TV supports ARC, audio signals from the TV can be input to this unit via the same HDMI cable used to output video signals from this unit to the TV. O TV TV jack OPTICAL O Audio output TV (digital optical) 1. Remove the cap 2. Check the direction of the plug • Use an ARC-compatible HDMI cable. • TVs not equipped with an optical jack Audio content from the TV can be input via the AUX2 coaxial digital or AUX1 analog jack. Set "TV INPUT" in the setup menu to "COAXIAL [AUX2]" or "ANALOG [AUX1]" accordingly (p. 60). PREPARATIONS ➤ Connections En 25