Yamaha YSP-2500 Owners Manual - Page 32
Auto setup for appropriate surround effects IntelliBeam
View all Yamaha YSP-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Auto setup for appropriate surround effects (IntelliBeam) In order for this unit to provide the optimal listening experience, adjust each channel first using the "IntelliBeam" function. • The AUTO SETUP procedure may not be run successfully if this unit is installed in one of the rooms described in "Unrecommended listening environments" on page 14. • In order for this unit to provide the optimal listening experience, adjust each channel first using the "IntelliBeam" function. The My Surround function can be used to enjoy rich surround sound in these types of rooms as well. See "Switching between audio output methods for surround playback" (p. 42) for more information. • Do not connect the IntelliBeam microphone to an extension cable as doing so may result in an inaccurate sound optimization. Installing the IntelliBeam microphone 1 Place the IntelliBeam microphone at your normal listening position. ❑ Assembling the supplied cardboard microphone stand • Use the supplied cardboard microphone stand or a tripod to place the IntelliBeam microphone at the same height as your ears would be when you are seated. • Position the IntelliBeam microphone so that it is parallel with the floor. IntelliBeam microphone Center height of this unit Upper limit Within 1 m (3.3 ft) Cardboard microphone stand 1.8 m (6.0 ft) or more Within 1 m (3.3 ft) Listening position Lower limit 1 2 Remove 3 Fit in Place horizontally 4 5 Fit in Run through Center line IntelliBeam microphone Cardboard microphone stand Make sure that there are no obstacles between the IntelliBeam microphone and the walls in your listening room as these objects obstruct the path of sound beams. However, any objects that are in contact with the walls will be regarded as a protruding part of the walls. PREPARATIONS ➤ Initial settings En 32