Yamaha YSP-2500 Owners Manual - Page 38
Setting the HDMI control function, Changing the connection method and, connected devices - reset
View all Yamaha YSP-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
z HDMI1 Setting the HDMI control function 1 Turn on the unit, TV, and playback devices. 2 Activate the HDMI control function on the unit, TV, and playback devices such as BD/DVD players that support this function. For this unit, set "HDMI CONTROL" to "ON". The default setting is "OFF" (p. 59). For playback devices, refer to the manual supplied with each device. 3 Turn off the main power of the TV and then turn off the unit and playback devices. 4 Turn on the unit and playback devices and then turn on the TV. 5 Switch the TV input to display the video from the unit. 6 Select the input source of this unit to BD/DVD player and check whether the image in the player is correctly displayed or not. If the BD/DVD player is connected via HDMI IN1 jack, press the HDMI1 key. HDMI1 Input source name 7 Check that the unit is properly synchronized with the TV by turning off the TV or adjusting the TV volume with the TV remote control. If the HDMI control function is not working Be sure that all devices are correctly connected to this unit, and that settings are properly configured as described below. - "HDMI CONTROL" (p. 59) is set to "ON" in the setup menu. - The HDMI control function is enabled on the TV. The example of TV settings • From the setup menu on your TV, select "Link setting" "HDMI control setting", then set a setting such as "HDMI control function" to "ON". • Set audio output to any option other than TV. When the HDMI control function is not still working even after the above has been checked, - Turn off this unit and the TV, and then turn them back on again. - Disconnect the AC power supply cable of the unit and external devices connected to the unit via HDMI cable. Plug them in again after about 30 seconds. - After OPTICAL, AUX1, or AUX2 input has been enabled, switch the input source for the TV and this unit to the devices connected via HDMI cable. Changing the connection method and connected devices When the connected devices and jacks are changed, reset this unit with the following procedure. 1 Disable the HDMI control function of the TV and BD/ DVD player, turn off all connected devices, and change the connections. 2 Perform steps 1 to 7 of "Setting the HDMI control function". PREPARATIONS ➤ Initial settings En 38