Yamaha YSP-2500 Owners Manual - Page 55
Image Location, Channel Out
View all Yamaha YSP-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
IMAGE LOCATION SETUP MENU ➜ BEAM ➜ IMAGE LOCATION If sound from the left and right channels is unnatural, first adjust the volume of each channel (p. 45, 56). If this does not resolve the problem, adjust left- and right-channel image location. Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to the center channel. You can adjust this parameter only when "5BEAM+2", "5BEAM" or "3BEAM" is selected in "Switching between audio output methods for surround playback" (p. 42). ❑ ADJUSTMENT Settings OFF (default) ON No adjustments are made. Choose "LEFT" or "RIGHT" to adjust the direction from which sound is heard. ❑ LEFT The higher the percentage, the louder the output from the center channel. Once "ADJUSTMENT" has been set to "ON", this setting can be selected. Control range 0% (default) to 95% Left-channel sound is unnatural With the front left channel adjusted ❑ RIGHT The higher the percentage, the louder the output from the center channel. Once "ADJUSTMENT" has been set to "ON", this setting can be selected. Control range 0% (default) to 95% Right-channel sound is unnatural With the front right channel adjusted CHANNEL OUT SETUP MENU ➜ BEAM ➜ CHANNEL OUT Specify the sound beam output method (5.1ch, 7.1ch, AUTO). Settings 5.1ch 7.1ch AUTO (default) 5.1-channel output 7.1-channel output Sound beams are output from the appropriate number of channels based on input signal as follows. - 2- or 5.1-channel input: 5.1-channel output - 6.1- or 7.1-channel input: 7.1-channel output • The available sound beam output methods vary depending upon the current "CHANNEL OUT" setting (p. 42). SETTINGS ➤ Setup menu En 55