Yamaha YSP-2500 Owners Manual - Page 72
Messages
![]() |
View all Yamaha YSP-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Remote control Problem Cause Remedy The remote control does not work The wrong distance or angle. and/or function properly. The remote control functions within a maximum range of 6 m (20 ft) and no more than 30 degrees off-axis from the front panel. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is Reposition this unit. striking the remote control sensor of this unit. The batteries are weak. Replace all batteries. The TV cannot be operated using the TV Remote Repeater function. The TV Remote Repeater function is disabled. A remote control using technology other than infrared is used (this unit may not support some infrared remote controls). Enable the TV Remote Repeater function. The TV Remote Repeater function cannot be used. Move the center unit so that it does not block the remote control sensor on the TV, and use the TV's remote control to operate the TV. The center unit and TV are too close together or too far apart. Move the center unit to adjust the distance between the TV Remote Repeater and the TV (remote control sensor). If necessary, adjust the height of the center unit. The center unit's power cable is unplugged. Plug in the power cable. There is an object, such as a power cable, between the center unit and TV. Remove the obstacle. See page 23 - 23 15 - 16 28 - Messages Message ViewScreen Key Locked Sleep XXmin Protected Disable Description This unit's setup menu is displayed on the TV screen. Use the TV screen to configure settings. The keys on the center unit are locked. Use the remote control. The Auto Power Standby function will turn this unit off in XX minutes. System memory 1, 2, and 3 are protected. Key operation is disabled. See page 51 65 65 65 - TROUBLESHOOTING ➤ Messages En 72
![](/manual_guide/products/yamaha-ysp2500-owners-manual-f322195/72.png)