Yamaha YSP-2500 Owners Manual - Page 26

Connecting playback devices Connect video devices such as BD/DVD players, set-top boxes (STBs) and game consoles to the unit. Depending on the video/audio output jacks available on your video device, choose one of the following connections. We recommend using an HDMI connection if the video device has an HDMI output jack. HDMI connection Connect a video device to the unit with an HDMI cable (not supplied). Optical connection Connect a video device to this unit via the optical cable. Next, connect the video device's video output to the TV's video input. Center unit (rear) SYSTEMSUBWOOFER CONNECTOR OUT R L AUX1 AUX2 TV OPTICAL HDMI OUT (ARC) IN1 IN2 IN3 HDMI IN1 IN2 IN3 Video device HDMI IN 1-3 jacks HDMI HDMI output HDMI HDMI Center unit (rear) SYSTEMSUBWOOFER CONNECTOR OUT R L AUX1 AUX2 TV OPTICAL HDMI OUT (ARC) IN1 IN2 IN3 O OPTICAL OPTICAL jack Video device To video output jack OPTICAL O Audio output (digital optical) If you select the input source by pressing the HDMI1-3 key, the video/audio played back on the video device will be output from the unit. • Once the HDMI control function has been activated (p. 37), video and audio content from playback devices can be output from the TV even when this unit is off (HDMI signal pass-through). • Use a 19-pin HDMI cable with the HDMI logo printed on it. A cable with a maximum length of 5 m is recommended to prevent degradation of signal quality. • Use an ARC-compatible HDMI cable. For playback of 3D and 4K video content, use a high-speed HDMI cable. 1. Remove the cap 2. Check the direction of the plug To video input jack TV If you switch the input source to the OPTICAL jack by pressing the OPTICAL key, the audio played back on the video device will be output from the unit. PREPARATIONS ➤ Connections En 26