Yamaha YSP-2500 Owners Manual - Page 35
Follow steps 4, 5, and 6 under Using AUTO SETUP
View all Yamaha YSP-2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
// ENTER 4 Press the S/T key to select one of the items below and then press the X key or ENTER key. Settings BEAM+SOUND OPTIMIZE Select this optimization feature if you make settings for the first time. This menu takes about 3 minutes. BEAM OPTIMIZE ONLY Use to optimize the beam angle so that the parameter best matches your listening environment. This menu takes about 1 minute. SOUND OPTIMIZE ONLY Use to optimize the beam delay, volume, and quality so that the parameters best match your listening environment. This menu takes about 2 minutes. You must optimize the beam angle with "BEAM OPTIMIZE ONLY" before starting "SOUND OPTIMIZE ONLY". Select this optimization feature in the following cases: • If you have opened or closed the curtains in your listening room before using this unit • If you have manually set the beam angle with "BEAM OPTIMIZE ONLY". 5 Connect the IntelliBeam microphone to this unit after "AUTO SETUP (PREPARATION & CHECK)" screen is displayed. For details on connecting IntelliBeam microphone, refer to "Using AUTO SETUP (IntelliBeam)" (p. 33). 6 Follow steps 4, 5, and 6 under "Using AUTO SETUP (IntelliBeam)" to configure settings, and then remove the microphone. • When the AUTO SETUP procedure is performed from the setup menu, the menu selection screen of the setup menu appears. PREPARATIONS ➤ Initial settings En 35