Zanussi ZCG63260XE User Manual - Page 23

A EF D B C Minimum distances Dimension mm A 650 B 450 C 2 D 400 E 150 F less than 400 LEVELLING OF THE APPLIANCE Use small feet on the bottom of appliance to set the appliance top surface level with other surfaces. THE STABILITY CHAIN CAUTION! Install the stability chain to prevent the appliance from tilting. The stability chain only works when the appliance is put in a correct area. 1. Measure down 180 mm from the appliance top surface, then measure right 30 mm. 2. Mark the position of the wall and this gives anchor point for the stability chain. 180 mm 30 mm OTHER TECHNICAL DATA WARNING! These instructions are only valid in the countries whose symbols appear on this booklet's cover. Gas category: Gas supply: Voltage: Frequency: I2H G20 (2H) 20 mbar 220-240 V 50 Hz GAS BURNERS BURNER Auxiliary Semi-rapid NORMAL POWER kW Natural Gas INJECTOR MARK 1/100 mm 1 70 1.9 96 Btu/h 3412 6483 23