Zenith DVR413 Operating Guide - Page 27

DVR SETUP Pre-operation Setup (Continued) DV Rec Audio You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN port. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for over-dubbing after shooting. On the Audio 1 setting, the sound that was recorded while shooting is used. On the Audio 2 setting, the over-dubbed sound is used. Rec Mode Set Rec Aspect DV Rec Audio Auto Chapter Audio 1 Audio 2 Auto Chapter When recording, chapter markers are put in at the specified interval. You can set this interval to 5 minutes, 10 minutes, or 15 minutes. If you select None, it switches automatic chapter marking off, no separations. Rec Mode Set Rec Aspect DV Rec Audio Auto Chapter None 5 Min 10 Min 15 Min Disc Disc Format If you load a completely blank disc, the Recorder will initialize the disc. DVD-R: The Recorder initializes the disc for Video mode. The recording mode will always be Video mode. DVD-RW: The Recorder initializes the disc for VR mode. DVD+R: The Initialization menu will appear. Select "Yes" then press ENTER. DVD+RW: The Recorder initializes the disc for DVD+RW mode. Also, you can format the disc from the Setup menu as to the right. Disc Format Finalize Disc Label Disc Protect Start 1 Press SETUP. The Setup menu appears. 2 Use v / V to select the Disc option. 3 While the Disc option is selected, press B to move to the second level. 4 Use v / V to select the Disc Format option. 5 Press B to move to the third level. Start icon is highlighted. 6 Press ENTER. Disc Format menu appears. 7 For DVD-RWs, use / B to select a Disc Format Mode (VR Mode or Video Mode) then press ENTER. For DVD+RWs, go to step 8. Disc Format Select a Mode VR Mode Video Mode 8 Use b / B to select "Ok" then press ENTER. It takes a few moments to format the disc. Disc Format All data on the disc will be deleted. Proceed? Ok Cancel Caution If you want to change the disc format, everything recorded on the disc will be erased. Disc Protect When recording in DVD+RW / +R disc or VR mode formatted DVD-RW disc, set to ON to prevent accidental recording, editing or deleting of the disc loaded. If you need to unlock the disc to make edits, select OFF. Disc Format Finalize Disc Label Disc Protect OFF ON 27