ZyXEL AG-320 User Guide - Page 58
Infrastructure, WPA-PSK, WPA2-PSK, Ad-Hoc, Disabled, Profile
View all ZyXEL AG-320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
ZyXEL AG-320 User's Guide • If you select Infrastructure network type in the first screen, select WEP, WPA-PSK, WPA, WPA2-PSK, WPA2 or 802.1x from the drop-down list box to enable data encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP encryption method. Otherwise, select Disabled to allow the AG-320 to communicate with the access points or other peer wireless computers without any data encryption and skip to step 5. Figure 35 Station Mode: Profile: Security Settings • The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the AG-320. Refer to Section 4.3.1 on page 49 for detailed information on wireless security configuration. Figure 36 Station Mode: Profile: Security Settings • This read-only screen shows a summary of the new profile settings. Verify that the settings are correct. Click Save to save and go to the next screen. Click Back to return to the previous screen. Otherwise, click Exit to go back to the Profile screen without saving. 58 Chapter 4 Wireless Station Mode Configuration