ZyXEL EX3510-B0 User Guide - Page 131
Network Setting > Home Networking, > Additional Subnet, LABEL, DESCRIPTION
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Chapter 8 Home Networking Click Network Setting > Home Networking > Additional Subnet to display the screen shown next. Figure 72 Network Setting > Home Networking > Additional Subnet The following table describes the labels in this screen. Table 34 Network Setting > Home Networking > Additional Subnet LABEL DESCRIPTION IP Alias Setup Group Name Active IPv4 Address Subnet Mask Public LAN Active Select the interface group name for which you want to configure the IP alias settings. See Chapter 15 on page 193 for how to create a new interface group. Click this switch to configure a LAN network for the Zyxel Device. When the switch goes to the right , the following fields will be configurable. Otherwise, they are not. Enter the IP address of your Zyxel Device in dotted decimal notation. Your Zyxel Device will automatically calculate the subnet mask based on the IPv4 address that you assign. Unless you are implementing subnetting, use this value computed by the Zyxel Device. Click this switch to enable or disable the Public LAN feature. When the switch goes to the right , the function is enabled. Otherwise, it is not. IPv4 Address Subnet Mask Your ISP must support Public LAN and static IP. Enter the public IP address provided by your ISP. Enter the public IPv4 subnet mask provided by your ISP. EX3510-B0 User's Guide 131