ZyXEL EX3510-B0 User Guide - Page 207
MAC Filter Overview, MAC Filter Settings
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 207 highlights
CHAPTER 17 MAC Filter 17.1 MAC Filter Overview You can configure the Zyxel Device to permit access to clients based on their MAC addresses in the MAC Filter screen. This applies to wired and wireless connections. Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is assigned at the factory and consists of 6 pairs of hexadecimal characters, for example, 00:A0:C5:00:00:02. You need to know the MAC addresses of the LAN client to configure this screen. 17.2 MAC Filter Settings Enable MAC Address Filter and add the host name and MAC address of a LAN client to the table if you wish to allow or deny them access to your network. Click Security > MAC Filter. The screen appears as shown. Figure 127 Security > MAC Filter You can choose to enable or disable the filters per entry; make sure that the check box under Active is selected if you want to use a filter, as shown in the example below. EX3510-B0 User's Guide 207