ZyXEL EX3510-B0 User Guide - Page 160
QoS Monitor
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Chapter 10 Quality of Service (QoS) Table 53 Policer Setup: Add/Edit LABEL DESCRIPTION Committed Burst Size Specify the committed burst size for packet bursts. This must be equal to or less than the peak burst size (two rate three color) or excess burst size (single rate three color) if it is also configured. Excess Burst Size This is the maximum size of the (first) token bucket in a traffic metering algorithm. Specify the additional amount of bytes that are admitted at the committed rate besides the committed burst size. This is the maximum size of the second token bucket in the srTCM. Peak Rate This field is only available when you select Single Rate Three Color in the Meter Type field. Specify the maximum rate at which packets are admitted to the network. The peak rate should be greater than or equal to the committed rate. This is to specify how many bytes of tokens are added to the second bucket every second in the trTCM. Peak Burst Size This field is only available when you select Two Rate Three Color in the Meter Type field. Specify the maximum amount of bytes that are admitted at the committed rate. This is the maximum size of the second token bucket in the trTCM. Conforming Action This field is only available when you select Two Rate Three Color in the Meter Type field. Specify what the Zyxel Device does for packets within the committed rate and burst size (greenmarked packets). Partial Conforming Action • Pass: Send the packets without modification. • DSCP Mark: Change the DSCP mark value of the packets. Enter the DSCP mark value to use. Specify the action that the Zyxel Device takes on yellow-marked packets. Select Pass to forward the packets. Select Drop to discard the packets. Select DSCP Mark to assign a specified DSCP number (between 0 and 63) to the packets and forward them. The packets are dropped if there is congestion on the network. NonConforming Action Available Class This field is only available when you select Single/Two Rate Three Color in the Meter Type field. Specify what the Zyxel Device does for packets that exceed the excess burst size or peak rate and burst size (red-marked packets). • Drop: Discard the packets. • DSCP Mark: Change the DSCP mark value of the packets. Enter the DSCP mark value to use. The packets may be dropped if there is congestion on the network. Select a QoS classifier to apply this QoS policer to traffic that matches the QoS classifier. Selected Class Highlight a QoS classifier in the Available Class box and use the > button to move it to the Selected Class box. Cancel OK To remove a QoS classifier from the Selected Class box, select it and use the < button. Click Cancel to exit this screen without saving any changes. Click OK to save your changes. 10.8 QoS Monitor To view the Zyxel Device's QoS packet statistics, click Network Setting > QoS > Monitor. The screen appears as shown. EX3510-B0 User's Guide 160