ZyXEL EX3510-B0 User Guide - Page 132
STB Vendor ID, Wake on LAN
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Chapter 8 Home Networking Table 34 Network Setting > Home Networking > Additional Subnet (continued) LABEL DESCRIPTION Offer Public IP by DHCP Click this switch to enable or disable the Zyxel Device to provide public IP addresses by DHCP server. When the switch goes to the right , the function is enabled. Otherwise, it is not. Enable ARP Proxy Click this switch to enable or disable the ARP (Address Resolution Protocol) proxy. When the switch goes to the right , the function is enabled. Otherwise, it is not. Cancel Click Cancel to restore the default or previously saved settings. Apply Click Apply to save your changes. 8.6 STB Vendor ID Use this screen to configure the Vendor IDs of connected Set Top Boxes (STBs) so the Zyxel Device can automatically create static DHCP entries for them when they request IP addresses. Click Network Setting > Home Networking > STB Vendor ID to open this screen. Figure 73 Network Setting > Home Networking > STB Vendor ID The following table describes the labels in this screen. Table 35 Network Setting > Home Networking > STB Vendor ID LABEL DESCRIPTION Vendor ID 1~5 These are STB's Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually used to inform the DHCP server a DHCP client's vendor and functionality. Cancel Click Cancel to restore the default or previously saved settings. Apply Click Apply to save your changes. 8.7 Wake on LAN Wake on LAN (WoL) allows you to remotely turn on a device on the network, such as a computer, storage device or media server. To use this feature the remote hardware (for example the network adapter on a computer) must support Wake on LAN using the 'Magic Packet' method. EX3510-B0 User's Guide 132