ZyXEL EX3510-B0 User Guide - Page 52
kbps
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Chapter 4 Tutorials • Configure a queue to assign the highest priority queue (1) to e-mail traffic going to the WAN interface, so that e-mail traffic would not get delayed when there is network congestion. • Note the IP address (192.168.1.23 for example) and/or MAC address (AA:FF:AA:FF:AA:FF for example) of your computer and map it to queue 7. Note: QoS is applied to traffic flowing out of the Zyxel Device. Traffic that does not match this class is assigned a priority queue based on the internal QoS mapping table on the Zyxel Device. QoS Example 10,000 kbps Your computer IP=192.168.1.23 and/or MAC=AA:FF:AA:FF:AA:FF E-mail traffic: Highest priority A colleague's computer Other traffic: Automatic classifier 1 Click Network Setting > QoS > General and click the QoS button to enable. When the switch goes to the right ( ), the function is enabled. Set your WAN Managed Upstream Bandwidth to 10,000 kbps (or leave this blank to have the Zyxel Device automatically determine this figure). Click Apply. Tutorial: Advanced > QoS 2 Click Network > Queue Setup > Add new Queue to create a new queue. In the screen that opens, click the Active field to enable. When the switch goes to the right ( ), the function is enabled. Enter or select the following values: • Name: E-mail • Interface: WAN • Priority: 1 (High) • Weight: 8 • Rate Limit: 5,000 (kbps) EX3510-B0 User's Guide 52