ZyXEL EX3510-B0 User Guide - Page 83
Label, Description
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Chapter 6 Broadband Figure 47 Network Setting > Broadband > Add/Edit New WAN Interface (Bridge Mode) The following table describes the fields in this screen. Table 17 Network Setting > Broadband > Add/Edit New WAN Interface (Bridge Mode) LABEL DESCRIPTION General Name Type Mode VLAN 802.1p Click this switch to enable or disable the interface. When the switch goes to the right function is enabled. Otherwise, it is not. , the Enter a service name of the connection. This field shows an Ethernet connection. Select Bridge when your ISP provides you more than one IP address and you want the connected computers to get individual IP address from ISP's DHCP server directly. If you select Bridge, you cannot use routing functions, such as QoS, Firewall, DHCP server and NAT on traffic from the selected LAN port(s). Click this switch to enable or disable VLAN on this WAN interface. When the switch goes to the right , the function is enabled. Otherwise, it is not. IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame that contains bits to define class of service. Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection. The greater the number, the higher the priority level. 802.1q Type the VLAN ID number (from 0 to 4094) for traffic through this connection. WAN MAC Address (You can set the WAN MAC address in the following section.) Factory Default Select Factory Default to use the factory assigned default MAC address. Clone LAN Host's MAC Address Select this option to clone the MAC address of the computer (displaying in the screen) from which you are configuring the Zyxel Device. It is advisable to clone the MAC address from a computer on your LAN even if your ISP does not presently require MAC address authentication. IP Enter the IP address of the computer on the LAN whose MAC address you are cloning. Address EX3510-B0 User's Guide 83