ZyXEL EX3510-B0 User Guide - Page 20
Color, Status, Description
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 1 Introducing the Zyxel Device Figure 5 LED Indicators None of the LEDs are on if the Zyxel Device is not receiving power. Table 2 LED Descriptions LED COLOR STATUS POWER Green On Blinking Red On INTERNET Green Blinking Off On Blinking Off Red On DESCRIPTION The Zyxel Device is receiving power and ready for use. The Zyxel Device is booting. The Zyxel Device detected an error while self-testing, or there is a device malfunction. The Zyxel Device is upgrading firmware. The Zyxel Device is not receiving power. The Zyxel Device has an IP connection but no traffic. Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used). The Zyxel Device is sending or receiving IP traffic. There is no Internet connection or the gateway is in bridged mode. The Zyxel Device attempted to make an IP connection but failed. Possible causes are no response from a DHCP server, no PPPoE response, PPPoE authentication failed. EX3510-B0 User's Guide 20