ZyXEL EX3510-B0 User Guide - Page 63
Connection Status, EX3510-B0 User's Guide, System Info: Detailed Information, Each field
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 5 Connection Status Figure 29 System Info: Detailed Information Each field is described in the following table. Table 7 System Info: Detailed Information LABEL DESCRIPTION Host Name This field displays the Zyxel Device system name. It is used for identification. Model Name This shows the model number of your Zyxel Device. Serial Number Firmware Version This field displays the serial number of the Zyxel Device. This is the current version of the firmware on the Zyxel Device. System Up Time This field displays how long the Zyxel Device has been running since it last started up. The Zyxel Device starts up when you plug it in, when you restart it (Maintenance > Reboot), or when you reset it. Interface Status Virtual ports are shown here. You can see whether the ports are in use and their transmission rate. WAN Information (These fields display when you have an Internet connection.) Name This field displays the name given to the Internet connection. Encapsulation This field displays the current encapsulation method. IP Address This field displays the current IPv4 address of the Zyxel Device. Click the Release button to release the IP address provided by a DHCP server. Click the Renew button to renew the IP address. Click the Disconnect button to disconnect the PPP WAN when PPP WAN has an IPv4 address. Click the Connect button to connect the PPP WAN. The Web Configurator will display the loading panel until the IP address has been released/renewed/disconnected/connected. EX3510-B0 User's Guide 63