ZyXEL EX3510-B0 User Guide - Page 99
WMM Settings
View all ZyXEL EX3510-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 7 Wireless Table 25 Network Setting > Wireless > WPS (continued) LABEL DESCRIPTION Method 2 Use this section to set up a WPS wireless network by entering the PIN of the client into the Zyxel Device. Click this switch and make it turn blue. Click Apply to activate WPS method 2 on the Zyxel Device. Register Enter the PIN of the device that you are setting up a WPS connection with and click Register to authenticate and add the wireless device to your wireless network. You can find the PIN either on the outside of the device, or by checking the device's settings. Cancel Apply Note: You must also activate WPS on that device within two minutes to have it present its PIN to the Zyxel Device. Click Cancel to restore the default or previously saved settings. Click Apply to save your changes. 7.6 WMM Settings Use this screen to enable WiFi MultiMedia (WMM) and WMM Automatic Power Save (APSD) in wireless networks for multimedia applications. WMM enhances data transmission quality, while APSD improves power management of wireless clients. This allows delay-sensitive applications, such as voice and videos, to run more smoothly. Click Network Setting > Wireless > WMM to display the following screen. Figure 56 Network Setting > Wireless > WMM Note: WMM cannot be disabled if 802.11 mode includes 802.11n or 802.11ac. EX3510-B0 User's Guide 99