ZyXEL Elite 2864I User Guide - Page 120
Extended AT* Command Set
View all ZyXEL Elite 2864I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
&X1 The terminal provides synchronous transmit clock signal. (External clock from pin 24 of EIA-232D.) &X2 The receiving carrier provides synchronous transmit clock signal. (Remote or Slave clock to pin 15 of EIA-232D.) &Y0 Destructive break, expedited. (Destructive break clears the buffer, expedited break is sent immediately.) + &Y1 Non-destructive break, expedited. (Default) &Y2 Non-destructive break, un-expedited. &Zn=s Stores the dial string(s) to EEPROM at location n (0 ≤ n ≤ 49). &Z? Displays all the phone numbers stored in EEPROM. Extended AT* Command Set + *B0 *Bn + *C0 *C1 *C2 *C3 *Dn + *E0 *E1 + *F0 *F1 + *G0 *G1 *G2 *G3 *G4 Disables dial-backup. (Default) Enables dial-backup and sets dial backup pointer at location n-1. (See also S44b2) 10-bit character length. (Default) 11-bit character length. 9-bit character length. 8-bit character length. Sets default dial pointer at phone directory location n. (See also S35b4, S38b0, &Zn, &D1.) If error control negotiation fails, the modem keeps the non-error control connection. (Default) If error control negotiation fails, disconnects the call (hang-up). Denies remote configuration. (Default) Accepts remote configuration (and Remote Digital Loopback must be granted - AT&T4). Disables security function. (Default) Enables type 1 security, with password check. Enables type 1 security, with password check and call back. Enables type 2 security, with password check. Enables type 2 security, with password check and call back. 9-10