ZyXEL Elite 2864I User Guide - Page 77
AT&K0, AT&K1, AT&K2, AT&K3, AT&K4, S38.5=1, AT&H0, AT&H3, AT&H4, AT&
View all ZyXEL Elite 2864I manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
ERROR CONTROL CONTROL LEVEL Level NONE MNP4 (MNP3) MNP4 + MNP5 V.42 (MNP4) + V.42(b) + MNP4(5) AT&K0 AT&K1 AT&K2 AT&K3 AT&K4 Error Control disabled MNP4 MNP4 V.42 or MNP4 V.42 or MNP4 Compression disabled disabled MNP5 disabled V.42bis based on V.42 or MNP5 based on MNP4 (Default) Note: S38.5=1 disables MNP5 with no interference to other settings. FLOW CONTROL DISABLED + CTS / RTS AT&H0 AT&H3 LOCAL XON/ XOFF PASS XON/XOFF AT&H4 AT&H5 DTE flow control is disabled. Hardware flow control CTS/RTS is enabled. (Default) Local software flow control XON/XOFF is enabled. reserved. NEGOTIA(TION) FALLBACK + STAYS ON-LINE AT*E0 DISCONNECT AT*E1 A non-error control connection is maintained if error control negotiation fails. (Default) Disconnects if no error control is established. BREAK HANDLING DESTRUCTIVE AT&Y0 + EXPEDITED AT&Y1 IN SEQUENCE AT&Y2 Destructive, expedited. Sends break, throws away data in buffer. Non-destructive, expedited. Sends break first ahead of data in buffer. (Default) Non-destructive, non-expedited. Sends break in sequence with data. 6-11