ZyXEL G-210H User Guide - Page 19
Tutorial, 2.1 Connecting to a Wireless LAN
View all ZyXEL G-210H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
CHAPTER 2 Tutorial The following sections show you how to connect to a wireless network using the ZyXEL utility and Windows Vista, as in the following diagrams. The wireless client is labeled C and the access point is labeled AP. Figure 5 Infrastructure Network There are three ways to connect the wireless client (the G-210H) to a network. • Configure nothing and leave the wireless client to automatically scan for and connect to any available network that has no wireless security configured. • Manually connect to a network (see Section 2.1 on page 19). • Configure a profile to have the wireless client automatically connect to a specific network or peer computer (see Section 4.3.1 on page 32). 2.1 Connecting to a Wireless LAN This example illustrates how to manually connect your wireless client to an access point (AP) which is configured for WPA-PSK security and connected to the Internet. Windows Vista is used. Before you connect to the access point, you must know its Service Set IDentity (SSID) and WPA-PSK pre-shared key. In this example, the SSID is "ZyXEL" and the pre-shared key is "ThisismyWPA-PSKpre-sharedkey" in the AP. After you install the ZyXEL utility and then insert the wireless client, follow the steps below to connect to a network using the Site Survey screen. 1 Open the ZyXEL utility and click the Site Survey tab to open the screen as shown next. G-210H User's Guide 19