ZyXEL NWA-3500 User Guide - Page 70
Testing the Configuration
View all ZyXEL NWA-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Chapter 3 Tutorial 2 Next, click the SSID tab. Check that each configured SSID profile uses the correct Security, Layer-2 Isolation and MAC Filter profiles, as shown in the following figure. Figure 43 Tutorial: SSID Tab Correct Settings If the settings are not as shown, follow the steps in the relevant section of this tutorial again. 3.5.6.2 Testing the Configuration Before you allow employees to use the network, you need to thoroughly test whether the setup behaves as it should. Take the following steps to do this. 1 Test the SERVER_1 network. • Using Alice's computer and wireless client, and the correct security settings, do the following. Attempt to access Server 1. You should be able to do so. Attempt to access the Internet. You should be able to do so. Attempt to access Server 2. You should be unable to do so. If you can do so, layer-2 isolation is misconfigured. • Using Alice's computer and wireless client, and incorrect security settings, attempt to associate with the SERVER_1 network. You should be unable to do so. If you can do so, security is misconfigured. • Using another computer and wireless client, but with the correct security settings, attempt to associate with the SERVER_1 network. You should be unable to do so. If you can do so, MAC filtering is misconfigured. 2 Test the SERVER_2 network. • Using Bob's computer and wireless client, and the correct security settings, do the following. Attempt to access Server 2. You should be able to do so. 70 NWA-3500/NWA-3550 User's Guide