ZyXEL NWA-3500 User Guide - Page 86
System Statistics Screen
View all ZyXEL NWA-3500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 4 Status Screens 4.2.1 System Statistics Screen Use this screen to view diagnostic information about the NWA. Click Show Statistics in the Status screen. The following screen pops up. Note: The Poll Interval field is configurable. The fields in this screen vary according to the current wireless mode of each WLAN adaptor. Figure 55 System Status: Show Statistics The following table describes the labels in this screen. Table 9 System Status: Show Statistics LABEL DESCRIPTION Port This is the Ethernet port (LAN) or wireless LAN adaptor (WLAN). Status This shows the port speed and duplex setting if you are using Ethernet encapsulation for the Ethernet port. Ethernet port connections can be in half-duplex or full-duplex mode. Full-duplex refers to a device's ability to send and receive simultaneously, while half-duplex indicates that traffic can flow in only one direction at a time. The Ethernet port must use the same speed or duplex mode setting as the peer Ethernet port in order to connect. TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time Poll Interval(s) Set Interval Stop This shows the transmission speed only for the wireless adaptors. This is the number of transmitted packets on this port. This is the number of received packets on this port. This is the number of collisions on this port. This shows the transmission speed in bytes per second on this port. This shows the reception speed in bytes per second on this port. This is total amount of time the line has been up. Enter the time interval for refreshing statistics. Click this button to apply the new poll interval you entered above. Click this button to stop refreshing statistics. 86 NWA-3500/NWA-3550 User's Guide