ZyXEL NWA50AX User Guide - Page 29
Hardware, NWA50AX User's Guide
![]() |
View all ZyXEL NWA50AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 3 Hardware The following are the LED descriptions for your Zyxel Device. Table 6 Zyxel Device LED COLOR STATUS Amber Green Blinks amber for 1 second and green for 1 second alternatively. Amber Green Blinks amber and green alternatively 3 times and then turns solid green for 3 seconds. Amber Green Blinks amber and green alternatively 2 times and then turns solid green for 3 seconds. Green Slow Blinking (On for 1 second, Off for 1 second) Green Steady On Bright Blue Steady On Blue Slow Blinking (Blink for 1 time, Off for 1 second) Red On Fast Blinking (On for 50 milliseconds, Off for 50 milliseconds) Slow Blinking (Blink for 3 times, Off for 3 seconds) DESCRIPTION The Zyxel Device is booting up or is connecting with NCC. The Zyxel Device is discovering the NCC or an AC. The Zyxel Device is managed by an AC but the uplink is disconnected. The wireless module of the Zyxel Device is disabled or fails, the Zyxel Device is using default wireless settings, or the Zyxel Device is configured to be managed by NCC but is not yet registered with the NCC. The Zyxel Device is ready for use, the Zyxel Device's wireless interface is activated, and/or wireless clients are connected to the Zyxel Device. The Zyxel Device's wireless interface is activated, but there are no wireless clients connected. The Zyxel Device is performing a Channel Availability Check (CAC) with Dynamic Frequency Selection (DFS) to monitor a channel for radar signals. The Zyxel Device failed to boot up or is experiencing system failure. The Zyxel Device is undergoing firmware upgrade. The Uplink port of the Zyxel Device in standalone mode is disconnected. NWA50AX User's Guide 29
![](/manual_guide/products/zyxel-nwa50ax-user-guide-8c475c9/29.png)