ZyXEL P-2601HN-F1 User Guide - Page 69
The Broadband Screen
View all ZyXEL P-2601HN-F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Chapter 5 Broadband 5.2 The Broadband Screen Use this screen to change your ZyXEL Device's Internet access settings. Click Network Setting> Broadband from the menu. The summary table shows you the configured WAN services (connections) on the ZyXEL Device. Figure 13 Network Setting > Broadband The following table describes the labels in this screen. Table 5 Network Setting > Broadband LABEL Add new WAN interface # Status Name Type Mode Encapsulation VPI/VCI VCI Vlan8021p VlanMuxId ATM QoS IGMP Proxy NAT Default Gateway Modify DESCRIPTION Click this button to create a new connection. This is the index number of the entry. This is the status of the connection. This is the service name of the connection. This shows the type of interface used by this connection. This shows whether the connection is in routing mode or bridge mode. This is the method of encapsulation used by this connection. This is the Virtual Path Identifier (VPI). This is the Virtual Channel Identifier (VCI). This indicates the 802.1P priority level assigned to traffic sent through this connection. This displays N/A when there is no priority level assigned. This indicates the VLAN ID number assigned to traffic sent through this connection. This displays N/A when there is no VLAN ID number assigned. This is the type of ATM QoS of the connection. This shows whether the ZyXEL Device act as an IGMP proxy on this connection. This shows whether NAT is activated or not for this connection. This shows whether the ZyXEL Device use the WAN interface of this connection as the system default gateway. Click the Edit icon to configure the connection. Click the Delete icon to remove the connection. P-2601HN(L)-F1 Series User's Guide 69