ZyXEL VES-1616PE-54 Support Guide - Page 20

SMG-700 configuration, Interface Configuration, PPPoE Setting Configuration

Get ZyXEL VES-1616PE-54 PDF manuals and user guides View all ZyXEL VES-1616PE-54 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

SMG-700 configuration 1. Interface Configuration a. Go to Network Setting > Interface Configuration b. Select "up1" for the uplink Interface c. Input the IP Address for the uplink interface, e.g. "172.168.23.10" d. Input the IP Subnet Mask for the uplink interface, e.g. "255.255.255.0" e. Click Apply f. Select "down1" for the downlink Interface g. Input the IP Address for the downlink interface, e.g. "172.168.23.10" h. Input the IP Subnet Mask for the downlink interface, e.g. "255.255.255.0" i. Click Apply 2. PPPoE Setting Configuration a. Go to Service Setting > PPPoE Setting b. Type the AC name (access concentrator) of the PPPoE service, e.g. "test.com" c. Select the Increment IP address and start from and input the IP, e.g. "192.168.3.100" d. Input the Maximum Concurrent Sessions, e.g. "3000" e. Check the Allow Duplicate MAC Address box f. Click Apply 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
20
SMG-700 configuration
1.
Interface Configuration
a.
Go to
Network Setting > Interface Configuration
b.
Select “up1” for the uplink
Interface
c.
Input the
IP Address
for the uplink interface, e.g. ”172.168.23.10”
d.
Input the
IP Subnet Mask
for the uplink interface, e.g. “255.255.255.0”
e.
Click
Apply
f.
Select “down1” for the downlink
Interface
g.
Input the
IP Address
for the downlink interface, e.g. “172.168.23.10”
h.
Input the
IP Subnet Mask
for the downlink interface, e.g. “255.255.255.0”
i.
Click
Apply
2.
PPPoE Setting Configuration
a.
Go to
Service Setting > PPPoE Setting
b.
Type the
AC name
(access concentrator) of the PPPoE service, e.g. “test.com”
c.
Select the
Increment IP address and start from
and input the IP, e.g.
“192.168.3.100”
d.
Input the
Maximum Concurrent Sessions
, e.g. “3000”
e.
Check the
Allow Duplicate MAC Address
box
f.
Click
Apply