ZyXEL VMG4825 User Guide - Page 132
Add/Edit Policy Route
View all ZyXEL VMG4825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
Chapter 9 Routing 9.4.1 Add/Edit Policy Route Click Add New Policy Route in the Policy Route screen or click the Edit icon next to a policy. Use this screen to configure the required information for a policy route. Figure 63 Policy Route: Add/Edit The following table describes the labels in this screen. Table 41 Policy Route: Add/Edit LABEL DESCRIPTION Active Select to enable or disable this policy route. Route Name Enter a descriptive name of up to 8 printable English keyboard characters, not including spaces. Source IP Address Enter the source IP address. Source Subnet Enter the source subnet mask address. Mask Protocol Select the transport layer protocol (TCP or UDP). Source Port Enter the source port number. Source MAC Enter the source MAC address. Source Interface Type the name of the interface from which the matched traffic is sent. WAN Interface Select a WAN interface through which the traffic is sent. You must have the WAN interface(s) already configured in the Broadband screens. OK Click OK to save your changes. Cancel Click Cancel to exit this screen without saving. VMG4825-B10A User's Guide 132