ZyXEL VMG4825 User Guide - Page 177
Interface Grouping Configuration
View all ZyXEL VMG4825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Chapter 14 Interface Grouping Table 73 Interface Group Configuration (continued) LABEL DESCRIPTION Automatically Add Clients With the following DHCP Vendor IDs Click Add to identify LAN hosts to add to the interface group by criteria such as the type of the hardware or firmware. See Section 14.2.2 on page 177 for more information. # This shows the index number of the rule. Filter Criteria This shows the filtering criteria. The LAN interface on which the matched traffic is received will belong to this group automatically. WildCard Support This shows if wildcard on DHCP option 60 is enabled. Remove Click the Remove icon to delete this rule from the VMG. OK Click OK to save your changes back to the VMG. Cancel Click Cancel to exit this screen without saving. 14.2.2 Interface Grouping Criteria Click the Add button in the Interface Grouping Configuration screen to open the following screen. Figure 99 Interface Grouping Criteria The following table describes the fields in this screen. Table 74 Interface Grouping Criteria LABEL DESCRIPTION Source MAC Address Select this option and enter the source MAC address of the packet. DHCP Option 60 Select this option and enter the Vendor Class Identifier (Option 60) of the matched traffic, such as the type of the hardware or firmware. Enable wildcard Select this option to be able to use wildcards in the Vendor Class Identifier configured for DHCP option 60. DHCP Option 61 Select this and enter the device identity of the matched traffic. VMG4825-B10A User's Guide 177