ZyXEL VMG4825 User Guide - Page 26
Table 3, FUNCTION
View all ZyXEL VMG4825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Chapter 2 The Web Configurator Table 3 Navigation Panel Summary (continued) LINK TAB FUNCTION Home Networking LAN Setup Use this screen to configure LAN TCP/IP settings, and other advanced properties. Static DHCP Use this screen to assign specific IP addresses to individual MAC addresses. UPnP Use this screen to turn UPnP and UPnP NAT-T on or off. Additional Subnet Use this screen to configure IP alias and public static IP. STB Vendor ID Use this screen to configure the Vendor IDs of the connected Set Top Box (STB) devices, which have the VMG automatically create static DHCP entries for the STB devices when they request IP addresses. Wake on LAN Use this screen to remotely turn on a device on the local network. TFTP Server Name Configure a TFTP server name which is sent to clients using DHCP option 66. Routing Static Route Use this screen to view and set up static routes on the VMG. DNS Route Use this screen to forward DNS queries for certain domain names through a specific WAN interface to its DNS server(s). Policy Route Use this screen to configure policy routing on the VMG. RIP Use this screen to configure Routing Information Protocol to exchange routing information with other routers. QoS General Use this screen to enable QoS and traffic prioritizing. You can also configure the QoS rules and actions. Queue Setup Use this screen to configure QoS queues. Classification Setup Use this screen to define a classifier. Shaper Setup Use this screen to limit outgoing traffic rate on the selected interface. Policer Setup Use this screen to configure QoS policers. NAT Port Forwarding Use this screen to make your local servers visible to the outside world. Applications Use this screen to configure servers behind the VMG. Port Triggering Use this screen to change your VMG's port triggering settings. DMZ Use this screen to configure a default server which receives packets from ports that are not specified in the Port Forwarding screen. ALG Use this screen to enable or disable SIP ALG. Address Mapping Use this screen to change your VMG's address mapping settings. Sessions Use this screen to configure the maximum number of NAT sessions each client host is allowed to have through the VMG. DNS DNS Entry Use this screen to view and configure DNS routes. Dynamic DNS Use this screen to allow a static hostname alias for a dynamic IP address. Vlan Group Vlan Group Use this screen to group and tag VLAN IDs to outgoing traffic from the specified interface. Interface Grouping Interface Grouping Use this screen to map a port to a PVC or bridge group. USB Service File Sharing Use this screen to enable file sharing via the VMG. Media Server Use this screen to use the VMG as a media server. Security VMG4825-B10A User's Guide 26