ZyXEL VMG8324 User Guide - Page 136
Add/Edit Policy Forwarding
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Chapter 8 Routing Table 44 Network Setting > Routing >Policy Forwarding (continued) LABEL WAN Modify DESCRIPTION This is the WAN interface through which the traffic is routed. Click the Edit icon to edit this policy. Click the Delete icon to remove a policy from the Device. A window displays asking you to confirm that you want to delete the policy. 8.4.1 Add/Edit Policy Forwarding Click Add new Policy Forward Rule in the Policy Forwarding screen or click the Edit icon next to a policy. Use this screen to configure the required information for a policy route. Figure 72 Policy Forwarding: Add/Edit The following table describes the labels in this screen. Table 45 Policy Forwarding: Add/Edit LABEL DESCRIPTION Policy Name Enter a descriptive name of up to 8 printable English keyboard characters, not including spaces. Source IP Enter the source IP address. Source Subnet Enter the source subnet mask address. Mask Protocol Select the transport layer protocol (TCP or UDP). Source Port Enter the source port number. Source MAC Enter the source MAC address. WAN Select a WAN interface through which the traffic is sent. You must have the WAN interface(s) already configured in the Broadband screens. Apply Click Apply to save your changes. Cancel Click Cancel to exit this screen without saving. 136 VMG8324-B10A / VMG8324-B30A Series User's Guide