ZyXEL VMG8324 User Guide - Page 90
The Others Screen
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Chapter 6 Wireless The following table describes the labels in this screen. Table 27 WDS: Scan LABEL DESCRIPTION Wireless Bridge Scan Setup Refresh Click Refresh to update the table. # This is the index number of the entry. SSID This shows the SSID of the available wireless device within range. BSSID This shows the MAC address of the available wireless device within range. Apply Click Apply to save your changes. Cancel Click Cancel to restore your previously saved settings. 6.8 The Others Screen Use this screen to configure advanced wireless settings. Click Network Setting > Wireless > Others. The screen appears as shown. See Section 6.10.2 on page 94 for detailed definitions of the terms listed in this screen. Figure 46 Network Setting > Wireless > Others The following table describes the labels in this screen. Table 28 Network Setting > Wireless > Others LABEL RTS/CTS Threshold DESCRIPTION Data with its frame size larger than this value will perform the RTS (Request To Send)/CTS (Clear To Send) handshake. Fragmentation Threshold Auto Channel Timer Enter a value between 0 and 2347. This is the maximum data fragment size that can be sent. Enter a value between 256 and 2346. If you set the channel to Auto in the Network Setting > Wireless > General screen, specify the interval in minutes for how often the Device scans for the best channel. Enter 0 to disable the periodical scan. 90 VMG8324-B10A / VMG8324-B30A Series User's Guide