ZyXEL VMG8324 User Guide - Page 63
The WAN Status Screen
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Chapter 5 Broadband 5.5.1 Edit 802.1X Settings Use this screen to edit 802.1X authentication settings. Click the Edit icon next to the rule you want to edit. The screen shown next appears. Figure 30 Network Setting > Broadband > 802.1x: Edit The following table describes the labels in this screen. Table 13 Network Setting > Broadband > 802.1x: Edit LABEL Active DESCRIPTION This field allows you to activate/deactivate the authentication. Interface EAP Identity EAP method Enable Bidirectional Authentication Certificate Trusted CA Apply Cancel Select this to enable the authentication. Clear this to disable this authentication without having to delete the entry. Select an interface to which the authentication applies. Enter the EAP identity of the authentication. This is the EAP method used for this authentication. Select this to allow bidirectional authentication. Select the certificate you want to assign to the authentication. You need to import the certificate in the Security > Certificates > Local Certificates screen. Select the Trusted CA you want to assign to the authentication. You need to import the certificate in the Security > Certificates > Trusted CA screen. Click Apply to save your changes. Click Cancel to exit this screen without saving. 5.6 The WAN Status Screen Click Network Setting > Broadband > Wan Status to open this screen. Use this screen to query and view the historical traffic transmission rate for a WAN interface in a bar chart. N/A displays if the specified WAN interface was disconnected at that time. VMG8324-B10A / VMG8324-B30A Series User's Guide 63