ZyXEL VMG8324 User Guide - Page 91
Table 28, Label, Description
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Chapter 6 Wireless Table 28 Network Setting > Wireless > Others (continued) LABEL Output Power Beacon Interval DESCRIPTION Set the output power of the Device. If there is a high density of APs in an area, decrease the output power to reduce interference with other APs. Select one of the following: 20%, 40%, 60%, 80% or 100%. When a wirelessly networked device sends a beacon, it includes with it a beacon interval. This specifies the time period before the device sends the beacon again. DTIM Interval 802.11 Mode The interval tells receiving devices on the network how long they can wait in low power mode before waking up to handle the beacon. This value can be set from 50ms to 1000ms. A high value helps save current consumption of the access point. Delivery Traffic Indication Message (DTIM) is the time period after which broadcast and multicast packets are transmitted to mobile clients in the Power Saving mode. A high DTIM value can cause clients to lose connectivity with the network. This value can be set from 1 to 255. Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to associate with the Device. Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to associate with the Device. Select 802.11n Only to allow only IEEE 802.11n compliant WLAN devices to associate with the Device. Select 802.11b/g Mixed to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate with the Device. The transmission rate of your Device might be reduced. 802.11 Protection Select 802.11b/g/n Mixed to allow IEEE 802.11b, IEEE 802.11g or IEEE802.11n compliant WLAN devices to associate with the Device. The transmission rate of your Device might be reduced. Enabling this feature can help prevent collisions in mixed-mode networks (networks with both IEEE 802.11b and IEEE 802.11g traffic). Select Auto to have the wireless devices transmit data after a RTS/CTS handshake. This helps improve IEEE 802.11g performance. Select Off to disable 802.11 protection. The transmission rate of your Device might be reduced in a mixed-mode network. Preamble This field displays Off and is not configurable when you set 802.11 Mode to 802.11b Only. Select a preamble type from the drop-down list box. Choices are Long or Short. See Section 6.10.7 on page 98 for more information. Apply Cancel This field is configurable only when you set 802.11 Mode to 802.11b. Click Apply to save your changes. Click Cancel to restore your previously saved settings. VMG8324-B10A / VMG8324-B30A Series User's Guide 91