ZyXEL VMG8324 User Guide - Page 47
The Broadband Screen
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 5 Broadband Dual Stack Lite Use Dual Stack Lite when local network computers use IPv4 and the ISP has an IPv6 network. When the Device has an IPv6 WAN address and you set IPv6/IPv4 Mode to IPv6 Only, you can enable Dual Stack Lite to use IPv4 computers and services. The Device tunnels IPv4 packets inside IPv6 encapsulation packets to the ISP's Address Family Transition Router (AFTR in the graphic) to connect to the IPv4 Internet. The local network can also use IPv6 services. The Device uses it's configured IPv6 WAN IP to route IPv6 traffic to the IPv6 Internet. Figure 21 Dual Stack Lite LAN - IPv6 - IPv4 WAN - IPv6 - IPv4 in IPv6 IPv6 + IPv4 ISP (IPv6) IPv6 IPv4 in IPv6 AFTR IPv4 Internet IPv6 Internet 5.1.3 Before You Begin You need to know your Internet access settings such as encapsulation and WAN IP address. Get this information from your ISP. 5.2 The Broadband Screen Use this screen to change your Device's Internet access settings. Click Network Setting > Broadband from the menu. The summary table shows you the configured WAN services (connections) on the Device. Figure 22 Network Setting > Broadband VMG8324-B10A / VMG8324-B30A Series User's Guide 47