ZyXEL VMG8324 User Guide - Page 54
Bridge Mode
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 5 Broadband Table 7 Network Setting > Broadband > Add New WAN Interface/Edit (Routing Mode) (continued) LABEL DESCRIPTION MTU MTU Size Enter the MTU (Maximum Transfer Unit) size for this traffic. Apply Click Apply to save your changes back to the Device. Cancel Click Cancel to exit this screen without saving. 5.2.1.2 Bridge Mode Click the Add new WAN Interface in the Network Setting > Broadband screen or the Edit icon next to the connection you want to configure. Select Bridge as the encapsulation mode. The screen varies depending on the interface type you select. If you select ADSL/VDSL over PTM as the interface type, the following screen appears. Figure 24 Network Setting > Broadband > Add New WAN Interface/Edit (Bridge Mode ) The following table describes the fields in this screen. Table 8 Network Setting > Broadband > Add New WAN Interface/Edit (Bridge Mode) LABEL DESCRIPTION General Active Select this to activate the WAN configuration settings. Name Enter a service name of the connection. Type Select ADSL/VDSL over PTM as the interface that you want to configure. The Device uses the VDSL technology for data transmission over the DSL port. Mode Select Bridge when your ISP provides you more than one IP address and you want the connected computers to get individual IP address from ISP's DHCP server directly. If you select Bridge, you cannot use routing functions, such as QoS, Firewall, DHCP server and NAT on traffic from the selected LAN port(s). VLAN This section is available only when you select ADSL/VDSL over PTM in the Type field. Active Select this to add the VLAN Tag (specified below) to the outgoing traffic through this connection. 54 VMG8324-B10A / VMG8324-B30A Series User's Guide