ZyXEL VMG8324 User Guide - Page 48
Table 6, Label, Description
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 5 Broadband The following table describes the labels in this screen. Table 6 Network Setting > Broadband LABEL Add New WAN Interface # Name Type Mode Encapsulation 802.1p 802.1q IGMP Proxy NAT Default Gateway IPv6 MLD Proxy Modify DESCRIPTION Click this button to create a new connection. This is the index number of the entry. This is the service name of the connection. This shows whether it is an ATM, Ethernet or a PTM connection. This shows whether the connection is in routing or bridge mode. This is the method of encapsulation used by this connection. This indicates the 802.1p priority level assigned to traffic sent through this connection. This displays N/A when there is no priority level assigned. This indicates the VLAN ID number assigned to traffic sent through this connection. This displays N/A when there is no VLAN ID number assigned. This shows whether the Device act as an IGMP proxy on this connection. This shows whether NAT is activated or not for this connection. This shows whether the Device use the WAN interface of this connection as the system default gateway. This shows whether IPv6 is activated or not for this connection. IPv6 is not available when the connection uses the bridging service. This shows whether Multicast Listener Discovery (MLD) is activated or not for this connection. MLD is not available when the connection uses the bridging service. Click the Edit icon to configure the WAN connection. Click the Delete icon to remove the WAN connection. 48 VMG8324-B10A / VMG8324-B30A Series User's Guide