ZyXEL VMG8324 User Guide - Page 228
The IPSec VPN Monitor Screen, Technical Reference
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Chapter 20 VPN 20.4 The IPSec VPN Monitor Screen Use this screen to check your VPN tunnel's current status. You can also manually trigger a VPN tunnel to the remote network. Click Security > IPSec VPN > Monitor to open this screen as shown next. Figure 138 Security > IPSec VPN > Monitor This screen contains the following fields: Table 105 Security > IPSec VPN > Monitor LABEL DESCRIPTION Refresh Interval Select how often you want the Device to update this screen. Select No Refresh to have the Device stop updating the screen. Status This displays a green line between two hosts if the VPN tunnel has been established successfully. Otherwise, it displays a red line in between. Connection Name This displays the name of the VPN policy. Remote Gateway This is the IP address of the remote IPSec router in the IKE SA. Local Addresses This displays the IP address(es) on the LAN behind your Device. Remote Addresses This displays the IP address(es) on the LAN behind the remote IPSec router. Action Click Trigger to establish a VPN connection with the remote network. 20.5 Technical Reference This section provides some technical background information about the topics covered in this section. 20.5.1 IPSec Architecture The overall IPSec architecture is shown as follows. 228 VMG8324-B10A / VMG8324-B30A Series User's Guide