ZyXEL VMG8324 User Guide - Page 55
ADSL over ATM
View all ZyXEL VMG8324 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 5 Broadband Table 8 Network Setting > Broadband > Add New WAN Interface/Edit (Bridge Mode) (continued) LABEL 802.1p DESCRIPTION IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame that contains bits to define class of service. 802.1q QoS Rate Limit Apply Cancel Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection. The greater the number, the higher the priority level. Type the VLAN ID number (from 0 to 4094) for traffic through this connection. Enter the rate limit for the connection. This is the maximum transmission rate allowed for traffic on this connection. Click Apply to save your changes. Click Cancel to exit this screen without saving. If you select ADSL over ATM as the interface type, the following screen appears. Figure 25 Network Setting > Broadband > Add New WAN Interface/Edit (ADSL over ATM-Bridge Mode) The following table describes the fields in this screen. Table 9 Network Setting > Broadband > Add New WAN Interface/Edit (ADSL over ATM - Bridge Mode) LABEL General Active Name Type DESCRIPTION Select this to activate the WAN configuration settings. Enter a service name of the connection. Select ADSL over ATM as the interface for which you want to configure here. The Device uses the ADSL technology for data transmission over the DSL port. VMG8324-B10A / VMG8324-B30A Series User's Guide 55