ZyXEL WAP3205 v3 User Guide - Page 11
LEDs, 1.4 The WPS/RESET Button
View all ZyXEL WAP3205 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
1.3 LEDs Figure 2 Front Panel Chapter 1 Introduction The following table describes the LEDs and the WPS button. Table 1 Front Panel LEDs and WPS Button LED COLOR STATUS DESCRIPTION POWER Green On The WAP3205 v3 is receiving power and functioning properly. Off The WAP3205 v3 is not receiving power. WLAN 2.4G Green On Blinking Ethernet WPS Green Green Off On Off On Blinking Off The WAP3205 v3 is ready, but is not sending/receiving data through the wireless LAN. The WAP3205 v3 is sending/receiving data through the wireless LAN. The WAP3205 v3 is negotiating a WPS connection with a wireless client. The wireless LAN is not ready or has failed. The WAP3205 v3 LAN port (any of 5 ports) is connected with a router or client device. The WAP3205 v3 LAN port (any of 5 ports) is not connected with a router or client device. WPS status is configured. The WAP3205 v3 is negotiating a WPS connection with a wireless client. The WPS status is not configured or disabled. 1.4 The WPS/RESET Button Your WAP3205 v3 supports WiFi Protected Setup (WPS), which is an easy way to set up a secure wireless network. WPS is an industry standard specification, defined by the Wi-Fi Alliance. WPS allows you to quickly set up a wireless network with strong security, without having to configure security settings manually. Each WPS connection works between two devices. Both devices must support WPS (check each device's documentation to make sure). WAP3205 v3 User's Guide 11