ZyXEL WAP3205 v3 User Guide - Page 46

PIN Configuration

Page 46 highlights

Chapter 5 Tutorials 1 Make sure that your WAP3205 v3 is turned on and that it is within range of your computer. 2 WPS is enabled by default on the WAP3205 v3. If not, log into WAP3205 v3's Web Configurator and turn it on in the Network > Wireless LAN > WPS screen. You can either press the WPS button on the WAP3205 v3's panel or press Push Button in the Network > Wireless LAN > WPS Station screen. 3 Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS Push Button or the WPS icon ( ). Note: It doesn't matter which button is pressed first. You must press the second button within two minutes of pressing the first one. The WAP3205 v3 sends the proper configuration settings to the wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the WAP3205 v3 securely. The following figure shows you an example to set up wireless network and security by pressing a button on both WAP3205 v3 and wireless client (the Android smartphone in this example). Figure 28 Example WPS Process: PBC Method Wireless Client WAP3205 v3 WITHIN 2 MINUTES WPS/Reset SECURITY INFO COMMUNICATION 5.3.2 PIN Configuration When you use the PIN configuration method, you need to check the client's PIN number and use the WAP3205 v3's configuration interface. WAP3205 v3 User's Guide 46

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

Chapter 5 Tutorials
WAP3205 v3 User’s Guide
46
1
Make sure that your WAP3205 v3 is turned on and that it is within range of your computer.
2
WPS is enabled by default on the WAP3205 v3. If not, log into WAP3205 v3’s Web Configurator and turn it
on in the
Network > Wireless LAN > WPS
screen. You can either press the WPS button on the WAP3205
v3’s panel or press
Push Button
in the
Network
>
Wireless LAN
>
WPS Station
screen.
3
Go to your phone settings and turn on Wi-Fi. Open the Wi-Fi networks list and tap WPS Push Button or the
WPS icon (
).
Note: It doesn’t matter which button is pressed first. You must press the second button within
two minutes of pressing the first one.
The WAP3205 v3 sends the proper configuration settings to the wireless client. This may take up to two
minutes. Then the wireless client is able to communicate with the WAP3205 v3 securely.
The following figure shows you an example to set up wireless network and security by pressing a button
on both WAP3205 v3 and wireless client (the Android smartphone in this example).
Figure 28
Example WPS Process: PBC Method
5.3.2
PIN Configuration
When you use the PIN configuration method, you need to check the client’s PIN number and use the
WAP3205 v3’s configuration interface.
Wireless Client
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
WAP3205 v3
WPS/Reset