ZyXEL WAP3205 v3 User Guide - Page 35
Status Screen (AP Mode), Status, AP Mode, LABEL, DESCRIPTION
View all ZyXEL WAP3205 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 4 Modes 4.2.1 Status Screen (AP Mode) Click on Status. The screen below shows the status screen in AP Mode. Figure 21 Status Screen (AP Mode) The following table describes the labels shown in the Status screen. Table 13 Status Screen (AP Mode) LABEL DESCRIPTION Device Information System Name This is the System Name you enter in the Maintenance > System > General screen. It is for identification purposes. Firmware Version This is the current firmware version of the WAP3205 v3. LAN Information - MAC Address This shows the LAN Ethernet adapter MAC Address of your device. - IP Address This shows the LAN port's IP address. - IP Subnet Mask This shows the LAN port's subnet mask. - DHCP Server This shows the LAN port's DHCP server status. WLAN Information - MAC Address This shows the wireless adapter MAC Address of your device. - Status This shows the current status of the Wireless LAN - Enabled or Disabled. - Name (SSID) This shows a descriptive name used to identify the WAP3205 v3 in the wireless LAN. - Channel This shows the channel number which you select manually or Auto when the WAP3205 v3 automatically scans and selects the Wireless Lan's channel. - Operating Channel This shows the current channel number the WAP3205 v3 uses for the wireless connection. - Security Mode This shows the data encryption method the WAP3205 v3 uses. - 802.11 Mode This shows the IEEE 802.11 standard that the WAP3205 v3 supports. Wireless clients must support the same standard in order to be able to connect to the WAP3205 v3. WAP3205 v3 User's Guide 35