ZyXEL WAP3205 v3 User Guide - Page 69

LAN IP Screen

Page 69 highlights

Chapter 7 LAN 7.3 LAN IP Screen Use this screen to change your basic LAN settings. Click Network > LAN. Figure 46 Network > LAN > IP The following table describes the labels in this screen. Table 31 Network > LAN > IP LABEL DESCRIPTION IP Address Type the IP address of your WAP3205 v3 in dotted decimal notation 192.168.1.1 (factory default). IP Subnet Mask The subnet mask specifies the network number portion of an IP address. Your WAP3205 v3 will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the WAP3205 v3. Apply Click Apply to save your changes back to the WAP3205 v3. Reset Click Reset to begin configuring this screen afresh. WAP3205 v3 User's Guide 69

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164

Chapter 7 LAN
WAP3205 v3 User’s Guide
69
7.3
LAN IP Screen
Use this screen to change your basic LAN settings. Click
Network
>
LAN
.
Figure 46
Network > LAN > IP
The following table describes the labels in this screen.
Table 31
Network > LAN > IP
LABEL
DESCRIPTION
IP Address
Type the IP address of your WAP3205 v3 in dotted decimal notation 192.168.1.1 (factory
default).
IP Subnet Mask
The subnet mask specifies the network number portion of an IP address. Your WAP3205 v3
will automatically calculate the subnet mask based on the IP address that you assign. Unless
you are implementing subnetting, use the subnet mask computed by the WAP3205 v3.
Apply
Click
Apply
to save your changes back to the WAP3205 v3.
Reset
Click
Reset
to begin configuring this screen afresh.