ZyXEL WAP3205 v3 User Guide - Page 62
Wireless LAN Advanced Screen
View all ZyXEL WAP3205 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Chapter 6 Wireless LAN Figure 38 Network > Wireless LAN > MAC Filter The following table describes the labels in this menu. Table 24 Network > Wireless LAN > MAC Filter LABEL DESCRIPTION Active Click Active check box to enable MAC address filtering. MAC Address (White List) This field shows the MAC addresses of the wireless station that are allowed or denied access to the WAP3205 v3 in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Select Click the Select radio button to select a MAC filter entry. Delete Click the Delete button to delete the selected MAC filter entry. Delete All Click the Delete All button to remove all MAC filter entries. MAC Address Enter the MAC addresses of the wireless station that are allowed or denied access to the WAP3205 v3 in these address fields. Enter the MAC addresses in a valid MAC address format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc. Add Click Add to add a new MAC address to the MAC Filtering rule. Apply Click Apply to save your changes back to the WAP3205 v3. Reset Click Reset to reload the previous configuration for this screen. 6.6 Wireless LAN Advanced Screen Use this screen to allow intra-BSS networking and set the RTS/CTS Threshold. Click Network > Wireless LAN > Advanced. The screen appears as shown. Figure 39 Network > Wireless LAN > Advanced WAP3205 v3 User's Guide 62