eMachines E627 Service Guide - Page 102
Replacing the LCD Panel, Run the cable across the back of the panel
View all eMachines E627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Replacing the LCD Panel 1. Connect the LCD cable to the panel connector as shown. 2. Press down the adhesive strip to secure the cable in place. 3. Run the cable along the back of the panel and press down as indicated to secure the cable in place. 4. Run the cable across the back of the panel as shown and press down as indicated to secure the cable in place. IMPORTANT: Ensure that the LCD cable runs between the green callouts to avoid trapping when the panel is replaced in the LCD Module. 92 Chapter 3
92
Chapter 3
Replacing the LCD Panel
1.
Connect the LCD cable to the panel connector as
shown.
2.
Press down the adhesive strip to secure the cable
in place.
3.
Run the cable along the back of the panel and
press down as indicated to secure the cable in
place.
4.
Run the cable across the back of the panel as
shown and press down as indicated to secure the
cable in place.
IMPORTANT:
Ensure that the LCD cable runs between the green callouts to avoid trapping when the panel is
replaced in the LCD Module.