eMachines E627 Service Guide - Page 50
Using the LAN MAC EEPROM Utility, StartAddr=7A
View all eMachines E627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Using the LAN MAC EEPROM Utility You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode. 1. Use a text editor (for example: Notepad) to open the MAC.CFG file. You can see the MAC.CFG contents as below: WriteData = '001122334455' StartAddr=7A WriteLeng=6 KeepByte=0 MAC value MAC address MAC value length don't care 2. In DOS mode, run the MAC.BAT file to write MAC values to eeprom. 40 Chapter 2
40
Chapter 2
Using the LAN MAC EEPROM Utility
You can use the MAC.BAT utility to write the MAC.CFG file to the EEPROM under DOS mode.
1.
Use a text editor (for example: Notepad) to open the MAC.CFG file. You can see the MAC.CFG contents
as below:
2.
In DOS mode, run the
MAC.BAT
file to write MAC values to eeprom.
WriteData = ‘001122334455'
MAC value
StartAddr=7A
MAC address
WriteLeng=6
MAC value length
KeepByte=0
don’t care