eMachines E627 Service Guide - Page 110
Replacing the TouchPad Bracket
View all eMachines E627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Replacing the TouchPad Bracket 1. Replace the TouchPad bracket top edge first to engage the securing clips. 2. Press the bracket down to engage the securing clips. 3. Replace the two screws to secure the TouchPad Bracket to the Upper Cover. 4. Replace the TouchPad FFC and close the locking latch on the connector. 100 Chapter 3
100
Chapter 3
Replacing the TouchPad Bracket
1.
Replace the TouchPad bracket top edge first to
engage the securing clips.
2.
Press the bracket down to engage the securing
clips.
3.
Replace the two screws to secure the TouchPad Bracket to the Upper Cover.
4.
Replace the TouchPad FFC and close the locking latch on the connector.