eMachines E627 Service Guide - Page 114
Replacing the Power Board, Upper Cover.
View all eMachines E627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Replacing the Power Board 1. Slide the Power Board in to the Upper Cover front edge first to engage the securing clip. 2. Press the board down to locate the securing pin. 3. Replace the two screws to secure the board to the Upper Cover. Replacing the Upper Cover 1. Place the Upper Cover on the Lower Cover as shown. 104 Chapter 3
104
Chapter 3
Replacing the Power Board
Replacing the Upper Cover
1.
Slide the Power Board in to the Upper Cover front edge first to engage the securing clip.
2.
Press the board down to locate the securing pin.
3.
Replace the two screws to secure the board to the
Upper Cover.
1.
Place the Upper Cover on the Lower Cover as shown.