eMachines E627 Service Guide - Page 112
Replacing the Right Speaker Module, Pass the cable through the Upper Cover as shown.
View all eMachines E627 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Replacing the Right Speaker Module 1. Place the module left side first on the Upper Cover 2. Replace the single screw to secure the module in as shown. Ensure that the left side of the module is place. seated correctly in the securing clip. 3. Pass the cable through the Upper Cover as shown. 4. Turn the Upper Cover over and run the cable along the cable channel using all available cable clips. 5. The cable runs as shown when correctly installed. 102 Chapter 3
102
Chapter 3
Replacing the Right Speaker Module
1.
Place the module left side first on the Upper Cover
as shown. Ensure that the left side of the module is
seated correctly in the securing clip.
2.
Replace the single screw to secure the module in
place.
3.
Pass the cable through the Upper Cover as shown.
4.
Turn the Upper Cover over and run the cable along
the cable channel using all available cable clips.
5.
The cable runs as shown when correctly installed.